Made to order in Gudiyatham · Delivered across Tamil Nadu, Kerala, Karnataka & APMinimum order 500 pieceskrsindustries.hosur@gmail.comCall / WhatsApp +91 99942 91383
KRS INDUSTRIESCorrugated packaging · Gudiyatham

Guide · Sizing

Inner vs outer box dimensions, explained

1 min read

Short answerBoxes are made to their inner size because that is what your product has to fit. The outer size is bigger by the board thickness on each side, and that is the size couriers, pallets and containers care about.

BoardTypical thicknessOuter size grows by about
3 ply (single wall)about 3 mm6 mm on each of L, W and H
5 ply (double wall)about 6–7 mm12–14 mm on each of L, W and H
7 ply (triple wall)about 10 mm20 mm on each of L, W and H

Why inner size comes first

Your product sits inside the box, so the inner length, width and height decide whether it fits. When you order, give us the inner size, or the product size and we will add the clearance.

How the outer size grows

Each wall adds its thickness to the outside, so the outer size is roughly the inner size plus two board thicknesses in each direction. The table shows typical figures. Actual thickness depends on the flute and paper, so we confirm exact outer sizes on your quote.

Clearance for your product

Leave a little room so the product goes in without forcing: a few millimetres for rigid items, more if you add padding, partitions or a tray. Too much space lets the product move, and that is how damage happens.

When outer size matters

Courier volumetric weight, pallet layouts and container loading all use the outer size. Try the box size calculator to see inner size, approximate outer size and boxes per pallet layer.

FAQ

Questions buyers ask

Do you quote inner or outer dimensions?

Inner dimensions, unless you ask otherwise.

How much bigger is the outside of a 5 ply box?

Roughly 12–14 mm on each dimension; we confirm the exact figure on your quote.

How much clearance should I leave?

A few millimetres for rigid products, more for padding or partitions. Tell us the product and we will suggest it.

Request a quote

Get a quote in three short steps

Tell us what you know. Not sure about ply, style or size? Choose “recommend” and we'll advise. The form writes a WhatsApp message for you.

Call or WhatsApp
+91 99942 91383
Email
krsindustries.hosur@gmail.com
Factory
1/80-A Kammavaram Patty Post, Ulli, Gudiyatham, Tamil Nadu 635813
Typical reply
Most quotes within 24–48 hours
What you need
Minimum order: 500 pieces
Size and delivery
Inner size (length × width × height), if known
How to measure a box
Your details
You get a reference number and a WhatsApp message ready to send.

Ready when you are

Tell us what goes in the box. We'll handle the rest.

Try “partition”, “palkova”, “5 ply” or “Coimbatore”.